Electric engine preheater 2000Watt OWLHeizer OWL-4D
- 220/230 Volt - 75-85 ° C Universal fit
- Suitable for all engines and vehicles
- incl. connection cable set for uncomplicated preheating
- 230V socket compatible with DEFA connection set
For assembly details, please visit our support page
After the heating element has been heated to about 75-85 ° C., it switches off until the temperature has cooled down to about 60 ° C.
The integrated pump operates continuously to ensure even heat distribution.
This warm-up cycle is repeated continuously.
Vehicle: Suzuki Jimny year 2013 with 1.3L petrol engine, 86PS 4,5L cooling liquid.
Temperature in closed garage -1 ° C.
Vehicle stood 12h. Preheater 30 minutes in operation. Total operating time 0.5h.
Heating time to the first independent shutdown Vorwärers, 15min. Cooling water temperature 50-60 ° C
The engine starts at a cooling water temperature of approx. 50-60 ° C even warmer than in the summer, the heating can be used quickly, the operating temperature is reached quickly.
Longer temperatures and a more uniform heating can be achieved by a longer running time.
Truck MAN 6 cylinder diesel, in Latvia at -25 degrees up to approx. 10 ° C within one hour of operation.
The engine and cooling water temperature is influenced by factors such as the Abstellort of the vehicle and the size of the cooling circuit during preheating.
We give in our offers to the internal circuit temperature of the respective preheater, no cooling water or engine temperature.
* It is necessary to operate the preheater to a terminal set.
There must be a connection set the company DEFA for pin connections are correct.
To find, eg at Ebay under the search term: "Anschlussset 2,5m"
The connection set is not included and can be purchased separately.
Voltage: 220-240 V 50 Hz
Power: max. 2000Watt to 230Volt
Pump Performance: max. 8 to 12 L / min.
Pump height: 90cm
Suitable for cooling water hoses of 16 to 20 mm internal diameter
Switching temperature of the preheater: approx. 75-85 ° C
Weight: approx. 1100 grams
Dimensions: 170 x 80 x 70 mm
Connection cable: not available, compatible DEFA connection socket
The switching temperature can vary and depends on the cooling water circuit
Manufactured according to international safety standards
- Heater (switching temperature 75-85 ° C) with round plug connector
- Hose clamps 2x
- 2 tees
- Mounting instructions in English
- ** No connection set is supplied **
More details about the product and its installation, and additional information can be found on our support page