OWLHeizer OWL 1 80°C DA with connection kit

regular price 139.99 €
131.99
You save 6 %
Price includes VAT, plus delivery

 

 

Electric engine preheater OWLHeizer OWL-1

 

  • 220/230 Volt - up to 80 ° C- Universal suitable for all engines and vehicles
  • Incl. Simple connection cable set for uncomplicated preheating

 

 

IMG_0171

 

 

Assembly:

For assembly details, please visit our support page

 

Function:

After the heating coil has been heated to approx. 80 ° C, the device switches itself off independently,

Until the temperature has cooled to about 60 ° C.

The integrated pump runs continuously. This warm-up cycle is repeated continuously.

 

Practical experience:

Vehicle: Suzuki Jimny year 2013 with 1.3L petrol engine, 86PS 4,5L cooling liquid.

Initial situation: Temperature in closed garage 0 ° C. Vehicle stood 12h. Preheater 1 hour in operation.

Total operating time 1h. Heating operation 60min. Rest Time 0min.

Final temperature, warmest spot outside of the motor about 57 degrees. In the engine it is already warmer.

The cooling water temperature indicator is already raised when the ignition is switched on and warm air from the interior heating system already comes.

Within 0.75Km (30km / h zone, no slope, 3rd gear, ventilation to warm) full operating temperature.

Conclusion: The engine starts at about 57 ° C even warmer than in summer, the heating can be used directly, the operating temperature is reached quickly.

 

Note:

The engine and cooling water temperature is influenced by factors such as the Abstellort of the vehicle and the size of the cooling circuit during preheating.

We specify the internal switching temperature of the respective preheater in our offers, no cooling water or engine temperature.

 

 

Technical specifications:

  • Voltage: 220-240 V 50 Hz
  • Power: max. 1100Watt to 230Volt
  • Pump Performance: max. 5 to 7 L / min.
  • Pump height: 60cm
  • Suitable for cooling water hoses of 16 to 20 mm internal diameter
  • Switching temperature of the preheater: approx. 60-80 ° C
  • Weight: 380 grams
  • Measurements: 110 x 60 x 60 mm
  • Length of connection cable: approx. 180 cm + 100 cm
  • Short pumping distance between input and output 3.5 cm
  • The switching temperature can vary and depends on the cooling water circuit
  • Manufactured according to international safety standards
  • CE marking

 

Delivery:

  • Heater (switching temperature 80 ° C)
  • Connection cable approx. 1.8 meters +
  • Ca.1.0 meters with Schukostecker
  • Hose clamps 2x
  • Mounting instructions in English


You can find more details about the product and its installation as well as further information on our support page

 

ähnlich EAN 

4260241254747, 4260241250930, 4260241251944, 4260241251975, 4260241254280, 4260241254433, 4260241251944, 4260241251982, 
4260241251937, 4016138658026, 0765643427644, 4016138774788, 0765643427651, 0792679927503, 0792679927510, 0792679927527,
0765643427613, 0792679927596, 0792679927572, 0765643427606, 0792679927589, 0792679927534, 0792679927541

Additional product information

Handbook Download

Browse these categories as well: All Engine heaters, Heater up to 85°C